MODEL 922 - SIDE STREAM OR SUBMERSION

Two cable assemblies are available. They are supplied with cable lengths of up to 100' and with
connectors as required by the pH meter or transmitter to which the cables will be attached. Both
include protected connectors that plug onto the electrode and seal against the electrode's leak 
tight o-ring(s).

The Model 922 has a 1/2" MNPT thread to which a coupling and length of supporting pipe can be
attached for submersion applications. It is also used when cables must be installed in conduit.

The other cable assembly, the Model 922-01 has a smooth cap. It is used where cable lengths are
short and conduit is not used. It is not designed for use in submersible applications.

Go to Main Page    Goto pH Sensor Selector